Epson FX-2190 Manuel de l'utilisateur - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson FX-2190. Epson FX-2190 48 pages. Impact printers
Également pour Epson FX-2190 : Spécifications (2 pages), Manuel (11 pages), Manuel de configuration (2 pages), Manuel d'information sur les produits (19 pages), Spécifications (2 pages), Référence rapide (12 pages), Commencer ici (2 pages)

Make sure your paper

has a clean, straight

edge. Then open both

sprocket covers and fit

the first four holes of

the paper, with the

printable side down,

over the tractor pins.

Close the sprocket covers. Then slide the right sprocket to remove

any slack in the paper and lock it in place by pushing the blue lock

lever down.

Attach the paper guide and lay it flat on the printer. Slide the edge

guides to the middle of the paper guide.

Turn on the printer. When the printer receives data, it automatically

loads the paper and starts printing.

If the first line on your page appears too high or low, change its position

with the Micro Adjust function. (See page 32.)

Caution:

Never use the knob to adjust the top-of-form position; this may damage the

printer or cause it to lose the top-of-form position.

Loading Continuous Paper with the Pull Tractor

Make sure the printer is turned off, and the printer cover is

removed. Also make sure the tractor is installed in the pull position

and the paper guide is lying flat on the printer. (You may need to

move the tractor from the rear push or front push position.)

Set the paper release lever to the pull tractor position.

Paper Handling