TomTom RIDER Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} TomTom RIDER. TomTom RIDER 44 pages. How to pair 2nd edition to a schuberth src communication system
Également pour TomTom RIDER : Manuel d'installation (1 pages), Manuel (4 pages)

Imprimer la page

Lisbon.book Page 12 Thursday, March 1, 2007 8:39 AM

Using your TomTom RIDER

Attach your headset to your helmet as shown

in the Installation Poster. Make sure you

position the microphone correctly. For best

results, don't position the microphone directly

in front of your mouth, position it just to the

side of your mouth.

Locating your current position

Your TomTom RIDER must be outside to be

able to locate your current position. The first

time you start your RIDER, it takes up to 5

minutes for the device to find your current

position.

In future, your position will be found much

faster, normally within a few seconds. If your

RIDER takes longer than 5 minutes to locate

your current position, make sure that you are

in an open place without tall buildings or trees

around you.

Your RIDER does not transmit your location,

so others cannot use it to track you while you

are driving.

Note: Before driving with your TomTom RIDER, we

recommend that you charge it fully using the home

charger.

Mounting your TomTom RIDER

Attach the RAM™ mount kit to your

motorcycle as shown on the Installation

Poster, then place your RIDER in the holder.

When you are attaching the mount kit to your

motorcycle, follow these guidelines:

• If you are unsure about attaching the

mount kit yourself, ask a professional to fit

it for you.

• Make sure that the mount kit does not

interfere with any of the controls on the

motorcycle.

• Always use the correct tools. If you use

unsuitable tools, you may damage or break

the mount kit.

• Do not overtighten nuts. You may crack

parts of the mount kit or damage your

handlebars if you overtighten the nuts.

• If you are using the u-bolt, don't forget to

put the rubber caps provided over the

exposed threads.

Damage due to modifications, improper

installation, road hazards or accidents, are not

covered. Neither RAM nor TomTom shall be

liable for any injury, loss, or damage, direct or

consequential, arising out of improper

installation, or inability to use product. Before

use, the user must determine the suitability of

the product for its intended use. The user

assumes all risk and liability, whatsoever, in

connection with the mount.