TomTom LINK 310 Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} TomTom LINK 310. TomTom LINK 310 5 pages. Logbook
Également pour TomTom LINK 310 : Manuel de l'utilisateur (46 pages)

Imprimer la page

Resetting TomTom Remote LINK

If your Remote LINK is paired with a device but not working properly, or if your

Remote LINK is paired with the wrong device, you can reset the device to the

default factory settings.

1. Press any button on your Remote LINK to switch it on.

2. Press any two buttons at the same time until you hear a sound.

Your Remote LINK switches off.

Note: To check if the reset was successful, press any key on your Remote LINK

to switch it on.

If the yellow LEDs on all three buttons are flashing, then the reset was

successful.

If the blue Connection LED is on, then the reset was not successful.

To reset your Remote LINK, repeat steps 1 to 2.

Resetting TomTom LINK 300/310

If you want to pair your LINK 300/310 to a different Remote LINK, you need to

reset the LINK 300/310. To reset the LINK 300/310, delete the Bluetooth

address for the Remote LINK for the corresponding vehicle in the

configuration dialogue in TomTom WEBFLEET and click "Save changes".