Acuity Brands Lighting Lithonia Lighting HLF LED Manuel d'instructions d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Acuity Brands Lighting Lithonia Lighting HLF LED. Acuity Brands Lighting Lithonia Lighting HLF LED 7 pages.
Imprimer la pageInstallation Instructions
HLF LED
HLF INTEGRAL SLIPFITTER (IS) INSTALLATION ON VERTICAL TENONS (+/- 5 °)
Note: Luminaire can be tilted up to 185 degrees (maximum) above horizontal.
6. Aim fixture as required and tighten the 7/16-14 SHC knuckle adjustment bolt using 35-40 ft-lbs. (See figure 1) For
units with photocontrol receptacle, the fixture mounting angle must be restricted per ANSI C136.10 and it is recom-
mended to not install beyond 45° from horizontal.
7. Energize the luminaire to verify its operation and proper illumination of area.
WARNING: DO NOT MOUNT THE KNUCKLE FITTER TO A TENON OR BRACKET THAT IS MORE THAN 5
DEGREES FROM VERTICAL. MOUNTING AT AN ANGLE GREATER THAN 5 DEGREES REQUIRES USE OF A
PROPERLY TIGHTENED THRU-BOLT AND LOCKNUT. FAILURE TO CORRECTLY INSTALL COULD RESULT IN
SERIOUS INJURY OR DEATH.
HLF1 with adjustable slipfitter (IS) mount
Lithonia Lighting Outdoor • One Lithonia Way • Conyers, Georgia 30012
Phone: 800-279-8041 • Fax: 770.918.1209 •
© 2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/13
HLF2 with adjustable slipfitter (IS) mount
www.lithonia.com
5 year limited warranty
Part Number: RJ521380 Rev C
Revision Date: 12-4-19