Epson R200 - Stylus Photo Color Inkjet Printer Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson R200 - Stylus Photo Color Inkjet Printer. Epson R200 - Stylus Photo Color Inkjet Printer 12 pages. User manual (p.i.m plug-in)
Également pour Epson R200 - Stylus Photo Color Inkjet Printer : Fiche d'information sur le produit (4 pages), Manuel complémentaire (1 pages), Commencer ici Manuel (9 pages), Manuel de l'utilisateur (12 pages), Manuel d'instruction (4 pages)

Note: You can also use the Status Monitor to find out which

cartridge is out of ink. See "Checking the Ink Supply" on page 4

for more information.

4. Lift up the cartridge cover.

5. Press in the tab on the back of the cartridge and lift the

cartridge out of the printer. Dispose of it carefully.

Warning: Keep ink cartridges out of the reach of children.

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets in your eyes, flush them thoroughly with water.

6. Unwrap the new ink cartridge.

Caution: Don't touch the green circuit board or remove any labels.

Don't touch the

green circuit board

11/03

EPSON Stylus Photo R200

7. Lower the cartridge into the holder, with the green circuit

board facing the front. Then gently push the cartridge down

until it clicks into place.

8. If you need to replace another ink cartridge, repeat steps 5

through 7 before continuing with step 9.

9. Close the cartridge cover.

10. Close the printer cover and press the H ink button. The

printer begins charging the ink delivery system.

The green P power light flashes and the printer makes

noise. Charging takes about half a minute. When it's

finished, the green P power light stops flashing and stays

on, and the red H ink light goes out.

Caution: Never turn off the printer while the green P power light is

flashing, unless the printer hasn't moved or made noise for more

than 5 mintues.

EPSON Stylus Photo R200

- 5