Epson R300 - Stylus Photo Color Inkjet Printer Référence rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Epson R300 - Stylus Photo Color Inkjet Printer. Epson R300 - Stylus Photo Color Inkjet Printer 6 pages. Product information guide
Également pour Epson R300 - Stylus Photo Color Inkjet Printer : Brochure (2 pages), Fiche d'information sur le produit (4 pages), Manuel (12 pages), Manuel de l'utilisateur (13 pages), Référence rapide (4 pages), Brochure (2 pages), Manuel de l'utilisateur (12 pages), Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (1 pages), Brochure (2 pages), Manuel d'instructions d'installation (12 pages), Manuel d'instruction (4 pages)

Install the

Ink Cartridges

Flip open the paper support

and pull up the extension.

Open the output tray,

then pull out the extension.

Lift the printer cover.

Unwrap the ink cartridges.

Open the cartridge cover and

remove the paper insert.

Lower each cartridge into its holder with

the green circuit board facing the front.

The color of the cartridge label should

match the marker on the holder.

Then gently push each ink cartridge

down until it is firmly seated.

Close the cartridge cover.

Press forward on the front left corner of

the cartridge cover to lock it in place.

Press the

and close the printer cover.

CAUTION: Don't turn off the

printer or interrupt charging

while the light is flashing or

you'll waste ink.

A progress bar is displayed on the

LCD panel during ink charging.

After ink charging is finished,

press OK.

Maintenance button

Don't touch the green circuit

board or remove any labels.