Epson RC170 Manuel - Page 37

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Epson RC170. Epson RC170 44 pages. Epson rc170 printer operator panel

B: Executing the display device selection command

5.2.1 Value Input

Integer numbers can be input from the Operator Panel.

When the value input command (Input #23, a) is executed in the application, the value input

area is displayed on the application screen of the Operator Panel.

If you touch this input area, the value input pallet is displayed. Use the value input palette to

input the required values, and apply the input data by the

value input pallet.

Integer a

a = 5

Input #23, a

You can display default data in the input area on the Operator Panel by substituting the

values to be input with data before executing the Input command.

OP1 Rev.1a

Same as the Print command, display device can be switched by the DispDev command.

Integer OfsQty

DispDev 23

Print "Input the offset travel."

Input OfsQty

5. Programming for Operator Panel

'Set the Operator Panel as the display device.

button on the right side of the