Argos Sainbury's 956/4657 Manuel d'instructions de montage - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Argos Sainbury's 956/4657. Argos Sainbury's 956/4657 9 pages. Charcoal bbq with built-in fan
Imprimer la page
Safety and Care Advice
Important - Please read this instructions fully before starting assembly
Warning: Whilst every effort has been made in the manufacture of your BBQ
to remove any sharp edges, care should be taken in handling to avoid any
accidental injury.
•
Assembly time: approx. 60 mins.
•
Make sure the assembly instructions have been followed correctly.
•
Set the Charcoal BBQ in a suitable position, on a level surface away from
areas likely to catch fire. The base of the Charcoal BBQ will get hot so ensure
it stands on a suitable surface.
•
Always stand your Charcoal BBQ outdoors and on level ground away from
trees and wooden fencing.
Ensure there is a least 1 metre clearance around all sides of the Charcoal
BBQ. Keep away from fences, over hanging branches and other combustible
materials.
•
Use Charcoal and a suitable lighting method.
•
Do not cook before the fuel has a coating of ash.
•
WARNING! This barbecue will become very hot , do not move it during
operation.
•
Do not use indoors.
•
WARNING! Do not use spirit or petrol for lighting or relighting! Use only
firelighters complying to EN1860-3!
•
WARNING! Keep children and pets away.
Method 1. Charcoal & Lighting Fluid/ Gel
•
Set up your Charcoal BBQ in a safe place. Place enough charcoal in the
charcoal grate to a depth of 3 - 5cm.
•
Taking care not to spill any liquid/ gel onto your hands or clothes. Apply
carefully the lighting fluid/ gel over the charcoal.
•
If using lighting fluid, wait for 30 seconds to allow the liquid to soak into the
charcoal.
•
Do not light the charcoal if you have spilt fluid or gel onto your clothes. Light
the charcoal using a long taper or safety lighter. The charcoal will then burn for
a period with flames.
•
When the flames die down, check the charcoal is beginning to glow red. If
your coals are going out, you should open all the vents and allow to cool down
before trying to apply more liquid.
CAUTION: Apply carefully lighting fluid/ gel in small amounts. Over application
can be dangerous.
2