Epson RX620 - Stylus Photo Color Inkjet Manuel d'information sur les produits - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'information sur les produits pour {nom_de_la_catégorie} Epson RX620 - Stylus Photo Color Inkjet. Epson RX620 - Stylus Photo Color Inkjet 19 pages. Epson scan icm updater v1.20 (psb.2008.07.001)
Également pour Epson RX620 - Stylus Photo Color Inkjet : Spécifications (2 pages), Commencer ici Manuel (8 pages), Mise à jour (1 pages), Manuel d'utilisation de base (45 pages), Manuel d'instruction (4 pages)

Imprimer la page

Epson RX620 - Stylus Photo Color Inkjet Manuel d'information sur les produits

8. Click OK. Epson Scan scans your document or photo to the

location you specified.

Placing Film or Slides on the Scanner

You can copy, scan, and print from 35 mm film strips and

slides. Follow the instructions below to:

❏ Remove the film holder and document mat

❏ Load 35 mm film strips in the film holder

❏ Place 35 mm slides on the film holder

Removing the Film Holder and Document

Mat

1. Open the scanner lid and slide out the document mat. Set

the mat aside so you can reinstall it for scanning reflective

documents later.

Note:

You can't scan film or slides unless the white document mat is

removed from the scanner lid.

2. Remove the film holder from its storage place. (Remember

to replace the film holder when you're done using it.)

3. Continue with one of these sections:

❏ "Loading 35 mm Film Strips in the Film Holder" below

(for film)

❏ "Placing 35 mm Slides on the Film Holder" on page 14

(for slides)

Loading 35 mm Film Strips in the Film

Holder

1. Remove the cover for the film strip holder.

2. Slide your film strip into the holder with the duller

(emulsion) side facing up. The top of the images should be

facing the outside edge of the film holder and the images

should be reversed.

3. Replace the film cover. (It should snap into place.)

4. Position the film holder so that the 35 mm film strip faces

the center of the scanner glass. The positioning posts on the

film holder fit in two small holes near the scanner lid, as

shown.

5. Close the scanner lid.

Now you are ready copy, print, or scan. See the User's Guide

for instructions.

11/04

Epson Stylus Photo RX620

Flourescent

lamp

Film strip is

in middle

of glass

Epson Stylus Photo RX620

- 13