Crow FW-KP Instructions d'installation et manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et manuel de l'utilisateur pour {nom_de_la_catégorie} Crow FW-KP. Crow FW-KP 8 pages. Wireless keypad

Imprimer la page
The FW-KP is a wireless remote control keypad for POWERWAVE & RUNNER security
and home automation control panels.
The FW-KP enables easy programming, arming and disarming of the control panel.
It also allows to control devices from anywhere in the home or office, using keypad
commands.
FEATURES:
•
Designed to comply with European Standards
•
Easy programming
•
User-friendly operation
•
Hand-held use and wall mounting
•
Back light illumination
•
Visual LED's indications
•
Audible signals confirm user commands
•
Up to 300 m range in open space
•
FSK unique technology
•
Keypads copy via smart EEPROM
•
Up to 5 year lithium battery life
•
Full Supervision
MAKING YOUR FW-KP WORKING WITH A WIRELESS CONTROL PANEL
1. INSTALL THE FW-RCV.
2. ENROLL REQUIRED OPERATION RADIO SIGNAL (ARM
/DISARM/STAY/CONTROL.
3. SET RADIO PANIC ALARM TO AUDIBLE OR SILENT.
4. ACTIVATE OUTPUT BY CHANNEL PANIC IF REQUIRED.
5. ACTIVATE OUTPUT BY RADIO CHANEL IF REQUIRED.
6. SET PENDANT CHIRPS FOR ARM/DISARM PARTITION "A" AND PARTITION
"B" IF REQUIRED.
ENROLLING RADIO CHANNELS
In order to load a radio command on the panel, press the appropriate address number
(e.g. P614E for channel 4).
The keypad buzzer will beep once for a second to indicate learn mode has been initiated
and the FW-RCV board LED will flash. The radio signal you wish to load must transmit a
signal within 30 seconds from entering learn mode, otherwise the panel will time out and
no code will be loaded. If a valid code is received within the 30 seconds the keypad will
2