Acuity Brands Lighting 5BPMW LED Instructions d'installation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Acuity Brands Lighting 5BPMW LED. Acuity Brands Lighting 5BPMW LED 5 pages. 6"/5"/4" baffle led module

Imprimer la page

INSTALLATION INSTRUCTIONS FOR 4BPMW LED

Retrofit 4" Installation with Socket Adaptor into Existing or New Construction Recessed Can:

Remove the existing lamp and reflector, leaving the socket hanging freely by the wires.

Securely screw socket adapter into socket inside the can. While supporting the LED module, plug the orange connector of socket

adapter into the LED module's mating orange connector.

DO NOT LET THE MODULE HANG UNSUPPORTED BY THE ORANGE CONNECTORS.

Once all connections are complete, gently push the LED trim into the recessed can opening until clips engage inside of can, and

the trim is flush with the ceiling surface.

NOTE: If installing into a retrofit-style housing with internal ceiling support clips, be sure to offset the clips on the trim with the

clips inside can.

4. INSTALLATION COMPLETE.

Retrofit 4" Installation with Hardwire Connection Kit:

Remove the existing lamp and reflector, leaving the socket hanging freely by the wires

Cut existing socket wires inside the recessed can close to the socket, and discard the socket.

Remove the socket adapter from the box. Cut both adapter wires close to the socket adapter and away from the orange

connector, and discard the socket. Remove the (2) red splice-connectors from the hardwire kit bag. Pair the housing and orange

connector wires by color into each red connector. Firmly squeeze the metal U-shaped insert into the wires. Flip the cover closed

to secure and insulate the connection.

While supporting the LED module, plug connector from the module into the mating connector just installed into the recessed can.

Push the wires and mated connectors up into the recessed can. DO NOT LET THE MODULE HANG UNSUPPORTED BY THE

ORANGE CONNECTORS.

Once all connections are complete, gently push the LED trim into the recessed can opening until clips engage inside of can, and

the trim is flush with the ceiling surface.

NOTE: If installing into a remodeler-style recessed can with internal ceiling support clips, be sure to offset the trim clips away

from the black clips inside can.

INSTALLATION COMPLETE.

RECOMMENDED DIMMING SWITCHES: The LED Modules are compatible with a multiple of standard residential dimmers. A list of recommended

dimmers can be found at www.lithonia.com, keyword search 6BP. Exclusion from the list does not mean a dimmer will not work in conjunction with your

LED module. Consult with your dimmer manufacturer regarding compatibility with LED modules/lamps.

RECESSED CAN COMPATIBILITY: Lithonia's 6" LED modules are tested to fit in a minimum enclosure of 6.0" diameter by 5.75" height, with a

maximum flange diameter of 7.5". For a list of compatible housings go to www.lithonialighting.com, keyword search 6BP.

LISTINGS: CSA certified to US and Canadian safety standards; Energy Star qualified; California Title 24 compliant; damp location listed; and WSEC

ASTEM E283 for Air-Tight rated with IC housings. Minimum lamp compartment 6 inches (151 mm) diameters by 7 inches (179 mm) tall or minimum

lamp compartment 198 IN3 (503cm3). Use only in open luminaires. Suitable for Type IC or Type Non-IC luminaires. The retrofit kit is accepted as a

component of a luminaries where the suitability of the combination shall be determined by CSA or authorities having jurisdiction.

PATENTS PENDING

Lithonia Downlighting

One Lithonia Way / Conyers, GA 30012

800-315-4935 / www.lithonia.com

INSTALLATION INSTRUCTIONS

6BPMW LED (6" Baffle LED Module); 5BPMW LED (5" Baffle LED Module)

4BPMW LED (4" Baffle LED Module)

Part No. CJ5201106 Rev. E

Page 4 of 5