Epson Stylus Color 400 Manuel de l'utilisateur - Page 21

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson Stylus Color 400. Epson Stylus Color 400 29 pages. Ms windows 3.x color printer drivers problems
Également pour Epson Stylus Color 400 : Fiche technique (2 pages), Fiche d'information sur le produit (4 pages), Manuel (12 pages), Manuel (13 pages), Manuel d'installation rapide (13 pages), Manuel d'information sur les produits (12 pages), Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (4 pages)

3.2.4.6 Removing the ASF Assembly

1. Remove the housing. (See Section 3.2.1.)

2. Release the attached hook from inside the printer mechanism, and remove the gear (34 mm) from the

ASF assembly roller shaft.

3. Take the cables out of the cable hook on the printer mechanism and the hook on the ASF assembly.

4. After removing 2 screws — 1 (No.7) and 1 CR shaft installation screw — remove the ASF assembly,

separating the protrusions on the left side of the ASF assembly from the frame holes.

;

When installing the ASF assembly, make sure the frame and ASF assembly are attached each other

with no space between them.

;

Use screws for the ASF assembly in the following positions (looking from the back of the printer):

Right

CR shaft installation screw

Left

Screw (No.7) (+ Bind, S- tight, Sems R2, with plain washer)

During installation,

make sure the protrusions

from the ASF assembly are

in these holes in the frame.

EPSON Stylus COLOR 400 Service Manual

Screw (No. 7) with Washer

Figure 3-15.Removing the ASF Assembly

Disassembly and Assembly

CR Shaft Installation Screw

Gear (34 mm)

3-19