Epson Stylus Color 400 Manuel - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Epson Stylus Color 400. Epson Stylus Color 400 13 pages. Ms windows 3.x color printer drivers problems
Également pour Epson Stylus Color 400 : Manuel de l'utilisateur (29 pages), Fiche technique (2 pages), Fiche d'information sur le produit (4 pages), Manuel (12 pages), Manuel d'installation rapide (13 pages), Manuel d'information sur les produits (12 pages), Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (4 pages)

Imprimer la page

EPSON Stylus COLOR 400

2. Press the

cleaning button and hold it down for three

seconds to clean the print heads. Cleaning takes about two

minutes, during which the printer makes some noise and the

power light flashes. It's finished when the

stops flashing.

3. Now check if the print heads are clean and reset the cleaning

function by running a nozzle check. Make sure paper is

loaded in the printer, then select

printer driver Utility menu.

Caution:

Never turn off the printer while the

flashing.

If your print quality has not improved, repeat the steps above.

Examining the Nozzle Check Pattern

Examine the nozzle check pattern you print. It should look

something like this, with the lower pattern colored cyan,

magenta, and yellow:

Each staggered horizontal and straight vertical line should be

complete, with no gaps in the dot pattern. If your printout

looks okay, you're done. If any dots are missing, clean the

print heads again, as explained in the previous sections.

Aligning the Print Heads

If your printouts contain misaligned vertical lines, you may

need to align the print heads.

1. Make sure the printer is turned on and paper is loaded.

2. Access the printer driver.

Caution:

Load paper that's at least 8.27 inches (210 mm) wide

so ink doesn't spray onto the platen.

3. Click the

tab.

Utility

4. Click the

Print Head Alignment

5. Follow the instructions on the screen to print a test page and

select the correct alignment.

12 - EPSON Stylus COLOR 400

power light

from the

Nozzle Check

power light is

icon.

Cleaning the Printer

1. Turn off the printer, unplug the power cord, and disconnect

the printer cable.

Caution:

Don't touch the gears inside the printer.

Never use alcohol or thinner for cleaning; they can

damage the printer components and case.

Don't use a hard or abrasive brush.

Don't get water on the printer components.

Don't spray lubricants or oils inside the printer.

2. Remove all the paper from the sheet feeder.

3. Carefully clean away dust and dirt with a soft, damp cloth.

4. Clean the exterior of the printer with a soft, damp cloth.

Keep the printer cover closed so water doesn't get inside.

5. If necessary, clean ink out of the printer's interior with a soft,

damp cloth.

Information Reference List

Engineering Change Notices

None

Product Support Bulletins

None

Technical Information Bulletins

None