Epson Stylus Color 480SXU Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson Stylus Color 480SXU. Epson Stylus Color 480SXU 11 pages. Windows printer software does not install
Également pour Epson Stylus Color 480SXU : Manuel d'utilisation quotidienne (24 pages), Fiche d'information sur le produit (4 pages), Brochure (2 pages), Bulletin d'information sur les produits (1 pages)
Imprimer la page
Install Ink Cartridges
Once your software is installed, you see the Setup Utility that
walks you through installing the ink cartridges.
Before handling your ink cartridges, be sure to read and follow
these ink cartridge precautions:
Don't move the ink cartridge holders by hand or you'll
damage the printer.
Remove the yellow tape seal from the top of the ink
cartridges or you'll permanently damage them. Don't
remove the clear seals on the bottom or ink will leak out.
Install both ink cartridges, and leave them installed for all
types of printing, or the printer won't work.
The ink cartridges packed with your printer are for initial
installation only.
Don't open an ink cartridge clamp to remove a cartridge
except to replace it with a new one. Once you remove a
cartridge, you can't reuse it, even if it contains ink.
Keep ink cartridges out of the reach of children and do
not drink the ink. If ink gets on your skin, wash the area
thoroughly with soap and water. If ink gets in your eyes,
flush them immediately with water.
1. At the first screen, click Next.
2. Follow the on-screen instructions to install your ink
cartridges.
3. When setup is complete, click OK. You see the EPSON
Product Registration screen.
4. Make sure English is selected, then follow the on-screen
instructions to register your printer. At the last screen, click
Done.
5. Close any open windows, then click Exit at the Main Menu
to close it.
6. Leave your CD-ROM in the drive and restart your
computer.
After restarting, you can install your bonus software
applications and electronic printer manual.
Printing on Special Media
Whether you print on plain paper or special media, you need
to select the Media Type setting according to the guidelines in
the table below.
For this paper name...
Plain paper and envelopes
EPSON Glossy Photo Greeting Cards
(inside surface)
EPSON 360 dpi Ink Jet Paper
EPSON Iron-On Cool Peel Transfer Paper
EPSON High Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Cards
EPSON Photo Quality Ink Jet Note Cards
EPSON Photo Quality Self Adhesive Sheets
EPSON Photo Quality Glossy Paper
EPSON Photo Paper
EPSON Glossy Photo Greeting Cards
(outside surface)
EPSON Photo Quality Glossy Film
EPSON Photo Stickers
EPSON Ink Jet Transparencies
Matte Paper - Heavyweight
Additional Media Loading Guidelines
Don't use the cleaning sheets that may be included with
your special media; they may damage the printer.
❏ Always handle sheets by the edges, and don't touch the
printable surface.
❏ Be sure to load the printable (whiter) side of the media face
up in the sheet feeder.
❏ You can load paper up to the arrow mark on the left edge
guide.
❏ In addition to the Media Type setting, remember to select
the correct Paper Size for your media in the printer
software.
❏ If the special media has protective sheets between the media
sheets, be sure to remove the protective sheets before
printing.
❏ If any paper you buy comes with a cleaning sheet, don't use
the cleaning sheet with this printer; it may jam inside the
printer.
9/00
EPSON Stylus Color 480SXU
Select this Media Type
setting
Plain paper
360 dpi Ink Jet Paper
Photo Quality Ink Jet Paper
Photo Paper
Photo Quality Glossy Film
Ink Jet Transparencies
Matte Paper - Heavyweight
EPSON Stylus Color 480SXU
5
-