Epson Stylus Color 740 Instructions d'installation rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'installation rapide pour {nom_de_la_catégorie} Epson Stylus Color 740. Epson Stylus Color 740 5 pages. Product support bulletin(s)
Également pour Epson Stylus Color 740 : Fiche d'information sur le produit (4 pages), Brochure (2 pages), Fiche d'information sur le produit (4 pages), Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (1 pages), Manuel d'information sur les produits (17 pages), Manuel de l'utilisateur (24 pages), Manuel d'installation du logiciel (8 pages), Spécifications (2 pages), Bulletin d'information sur les produits (3 pages), Bulletin d'information sur les produits (2 pages), Bulletin d'information sur les produits (4 pages), Bulletin d'information sur les produits (7 pages), Manuel en ligne (10 pages)

Imprimer la page
Epson Stylus Color 740 Instructions d'installation rapide
3. Lower the printer's output tray and open the cover.
4. Press the
power button to turn on the printer. The
power light flashes and the black and
out lights come on. The ink cartridge holders move
into loading position.
Caution:
Always use the
printer on or off. Never use an external
switch, such as a power strip switch.
5. Lift up the two ink cartridge clamps.
6. Place the ink cartridges in their holders with the labels
facing up and toward the back of the printer. Then
press down the clamps until they lock into place.
WARNING:
If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in
your eyes, flush them immediately with water.
color ink
power button to turn the
7. Press the
cleaning button to begin charging the
ink delivery system and close the printer cover.
Charging takes about a minute. The
flashes and the printer makes various sounds until
it's finished. Don't turn off the printer or interrupt
the charging process or it will start over, using more
ink than necessary. Charging is finished when the
power light stops flashing and stays on.
Caution:
Never turn off the printer while the
light is flashing, unless the printer hasn't
moved or made any noise for more than
5 minutes.

4 Load Paper

1. Open the output tray extensions. Slide the left edge
guide right until it is a little wider than your paper.
2. Load a stack of plain paper with the printable side up
and place it against the right edge guide. Then slide
the left edge guide up against the paper's left edge.
Don't load paper higher than the arrow on the guide.
Load paper only up
to this arrow
power light
power
Slide paper against
the right edge guide