Epson Stylus Photo 1270 Fiche d'information sur le produit - Page 2

Parcourez en ligne ou téléchargez le pdf Fiche d'information sur le produit pour {nom_de_la_catégorie} Epson Stylus Photo 1270. Epson Stylus Photo 1270 4 pages. Product support bulletin(s)
Également pour Epson Stylus Photo 1270 : Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (1 pages), Spécifications (2 pages), Informations sur le produit (11 pages), Manuel complémentaire (2 pages), Bulletin d'information sur les produits (3 pages), Bulletin d'information sur les produits (2 pages), Bulletin d'information sur les produits (4 pages), Bulletin d'information sur les produits (7 pages), Manuel de configuration (17 pages)

Imprimer la page

EPSON

First Aid Measures

4.1

Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical

attention if eye irritation continues.

4.2

Skin: Wash surface areas with soap and water. Wash soiled clothing before rewearing. Seek medical attention if

irritation continues.

4.3

Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary

4.4

Ingestion: Seek medical attention if stomach continues to be upset.

Fire Fighting Measures

5.1

Flammability: Flash point is greater than 230 deg. F / 110 deg. C (closed cup in accordance with ASTM D3278)

5.2

Extinguishing Media: Dry chemical or carbon dioxide

5.3

Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus. No

special explosion hazards are known.

Accidental Release Measures

If a spill occurs, use sponges to wipe-up ink, then rinse area with damp cloth. Place waste in closed container for

disposal. Use proper ventilation. Do not dispose of waste to the sewer. No eye or skin protection required during

clean-up. Wash hands with soap and water.

Precautions for Safe Handling and Use

Keep out of reach of children and do not drink ink. Do not store the cartridge in a high or freezing temperatures.

Keep cartridge out of direct sunlight. Do not dismantle cartridge. Do not store cartridges with oxidizing agents or

explosives. Make sure cartridge is dry before insertion into printer housing.

Exposure Controls and Personal Protection

8.1

Engineering Controls: None required

8.2

Exposure Controls: None required

8.3

Personal Protection: None required when cartridges are used as intended

Physical and Chemical Properties of Ink Formulation

Appearance:

Odor:

pH:

Boiling point:

Freezing point:

Melting point:

Flash point:

Autoflammability:

Explosive properties:

______________________________________________________________________________________________________

PIS # T003011

Page 2 of 4

Black Liquid

None

9.0 – 10.0

Approximately 212 deg. F / 100 deg. C

Less than 32 deg. F / O deg. C

Greater than 230 deg. F / 110 deg. C (closed cup, ASTM D3278)

None

Version 3.51 (USA)

Release Date 01/04