Dill TPMS 1502 Manuel d'instruction - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dill TPMS 1502. Dill TPMS 1502 16 pages. Trailer kit

3.8 Tire Rotation

3.8.1 Reference your tire manufacturer for proper tire rotation on your

trailer.

3.8.2 Note the current installation positions of the transmitter and ID

modules.

For example, if you need to rotate the Left Front Wheel (LF)

transmitter A and Right Rear Wheel (RR) transmitter C, then

interchange ID chip module A and ID chip module C.

Reactivate the system (reference section 3.2) to accept new

transmitter positions and to indicate the proper location of the

transmitter on the display unit.

3.9 Replacement of Transmitter and ID Module

Verify a "System Malfunction (reference section 3.6.4)" before replacing the

transmitter or ID module.

3.9.1 Replace the inoperable transmitter and ID module with a new one.

3.9.2 Transmitter Activation (reference section 3.2).

3.9.3 Reset the cold inflation pressure setting (reference section 3.3).

3.10 Restart the system

The system has to be restarted to re-identify the ID module in the following

situations:

3.10.1 Tire rotation.

3.10.2 Replacement of a transmitter and ID module.

3.10.3 To restart the system, disconnect the power cord for 1 minute and

plug in again.