Dill 1502 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dill 1502. Dill 1502 16 pages. Tpms trailer kit

The display is now in learn mode and will store the cold inflation pres

sure of each tire once it receives a signal from it. The process may take

up to 8 minutes. If all pressures are not received in 8 minutes, the dis

play will shift back to the monitoring mode. The tire positions that did

not register will display 00. You will need to repeat section 1.3.2 until a

signal is received from all tire positions. Driving the vehicle will speed

up the process, since when rotating; the transmitters send a signal more

frequently than when the vehicle is stationary.

If repeating the baseline pressure setting process does not get all the

tires positions to register, or the display to receiving a signal on an

intermittent basis, experimentation with an external antennal and/or

signal booster will be necessary to get the unit to function.

1.4 Using the External Antenna - RF Interference

The system has been tested to work 40 feet, along line-of-sight path

ways. However, tire construction, vehicle construction, electronic

interference and low temperatures all reduce this distance. RF signals

are subject to interference from many types of signals and products,

which can cause errors in the operation of the product. As with cell

phones and other types of electronics using RF signals, signal

interruption can occur and cause lost signal transmission.

External Antenna Installation

19' COAXIAL

WIRE

ANTENNA

MAGNET

NOTE: MAGNETIC

STRENGTH WILL ADHERE

QUICKLY TO ANY METALLIC

OBJECTS. KEEP FINGERS

AWAY FROM THE BOTTOM

OF THE MAGNET.

FIGURE 3

DISPLAY/RECEIVER

CONNECTOR