Epson Stylus Pro 5000 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson Stylus Pro 5000. Epson Stylus Pro 5000 12 pages. Epson stylus pro 5000: product information
Également pour Epson Stylus Pro 5000 : Manuel de l'utilisateur (34 pages), Manuel de l'utilisateur (44 pages), Service étendu (1 pages), Spécifications (6 pages), Remplacement des cartouches (2 pages)

Imprimer la page

Epson Stylus Pro 5000 Manuel de l'utilisateur

The following table indicates the substrate sizes you can print

from the four paper paths:

Substrate sizes and paper paths

Standard

paper tray

Half letter/

A5 or less

Executive

(7.5

10 in.)

Letter/A4

Letter/A4 landscape

Legal

Ledger/tabloid/A3/B

(11

17 in.)

Super A3/B

(13

19 in.)

Panoramic or

banner paper

longer than 19 in.

Using the Standard and Optional

Paper Trays

You can use these trays for most sizes of paper up to 13 × 19

inches. The standard paper tray can handle all smaller sizes of

paper; however, the optional lower tray can't handle paper

smaller than 7.5 × 10 inches (Executive size).

When you load paper in either of the trays, you need to set the

paper size and media type levers to match the paper you're

using, as described in the following section.

This allows your software to verify that the print option

settings for a project are correct for the substrate you're using.

If the print option settings for a job don't match the lever

settings, you'll get an error message, and your job won't print.

This will save you both time and money by making sure you

don't accidently print with the wrong settings.

Note:

You can disable verification by setting the levers to Other. However,

the purpose of paper size and media type (print mode) verification is

to help you avoid printing errors, and you should take advantage of

this help whenever possible.

Setting the Paper Tray Levers

For best printing results, you need to set the media type and

paper size levers correctly when you load paper. You should

also use the media type and paper size cards to identify the

substrate loaded in each tray. This helps all users to be aware

of what's in the printer at a glance, and also prevents anyone

from inadvertently changing the lever positions.

Optional

Front

Rear

lower

manual

paper tray

slot

The following table identifies the media type settings for

EPSON media and similar substrates:

Media type lever settings

Substrate

Plain paper

Photo Quality Ink Jet Paper or

Card stock

Photo Quality Glossy Paper

Photo Quality Glossy Film

Ink Jet Transparencies

360 dpi Ink Jet Paper

Use only if ink smears

Use for unlisted substrates

Note:

For any substrates not on this list, set the lever to Other.

The following table identifies the paper size settings:

Paper size lever settings

Media size

13 × 19 in.

297 × 420 mm

Ledger/tabloid/11 × 17 in.

Legal/11 × 14 in.

210 × 297 mm

Letter/8.5 × 11 in.

No. 10/DL/C5/C6 envelopes

Any other size

To set the levers and use the cards:

1. Load paper or other substrate.

2. Set the media type and paper size levers according to the

guidelines in the tables above.

3. Find the paper size and media type cards that match the

substrate you loaded, open the clear plastic covers above the

levers, and insert the cards.

paper size

If you change substrates in one of the trays, be sure you

change the lever settings and cards. Store unused cards on the

sheet with adhesive windows.

11/98

EPSON Stylus Pro 5000

Media type lever setting

Plain Paper

Photo Quality Paper

Glossy Paper

Glossy Film

Transparencies

360dpi Paper

Thick Paper

Other

Paper size lever setting

Super A3/B

LGR

LGL

LTR

Envelope

Other

media type

levers

EPSON Stylus Pro 5000

- 9