Dillon ED-2000plus Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dillon ED-2000plus. Dillon ED-2000plus 20 pages. Electronic dynamometer with hr-2000 remote

Imprimer la page

ED-2000plus Introduction

The ED-2000plus is not suit-

able for use in magnetic

environments.

The ED-2000plus dynamometer is an electronic portable force or weight

measurement instrument.

The ED-2000plus is available with low-power radio communications. This

option permits wireless communication between the ED-2000plus and an

HR-2000 handheld remote display. The ED-2000plus system offers additional

flexibility by the ability to have several (up to 255) devices controlled by a

single HR-2000 display. This is called a multidrop system.

Data can be extracted from either the ED-2000plus or the HR-2000. This data

can be sent to a computer by pressing the DATA SEND key or requested by

the computer by sending an ENQUIRE code.

This guide describes the operation of the ED-2000plus series of Dillon elec-

tronic dynamometers and the procedures for configuring the device to your

specific needs.

The display consists of six 7-segment digits and six annunciators which

appear when appropriate. See Figure 1 below.

There are three modes of operation:

• Normal operating mode, which covers the daily use of the device.

• Device information mode, allows information about the device to be

viewed but not edited. Information that can be viewed includes serial

number, range, date of last calibration, etc.

• Configuration mode, which enables the user to configure the device.

Electronic Dynamometer Front Panel

Figure 1