Epson TM-L90 series Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Epson TM-L90 series. Epson TM-L90 series 12 pages. Attaching cover on the power switch
Également pour Epson TM-L90 series : Brochure (1 pages), Brochure (2 pages), Manuel du produit (27 pages), Spécifications (2 pages), Spécifications (8 pages), Manuel d'information (5 pages), Spécifications (4 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (21 pages), Manuel de l'utilisateur (21 pages), Manuel de fabrication (22 pages), Commencer ici (2 pages), Commencer ici (2 pages), Manuel (13 pages), Manuel de l'utilisateur (36 pages), Manuel de développement (34 pages), Manuel (2 pages)

How to connect an Epson wireless POS printer

A sheet will print showing the MAC address, SSID, mode, wireless channel number, authorization method (None, WEP),

Gateway (GW), IP address and IP assignment method.

The network specific settings have been highlighted above.

Resetting Card to Default Values

You can reset the card to the default settings by:

1. Turn off power on the printer

2. Hold the push button on the wireless card down

3. Turn on power to the printer

4. Count to 5

Check that the settings are reset by running the

Parameter

Network

Mode

SSID

IP-Address

Subnet mask 255.255.255.0

Gateway

address

IP-Address

http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]

Initial Value

AdHoc

EpsonNetIBSS

192.168.192.168

0.0.0.0

wireless card

self-test, above.

Setting Instructions

Infrastructure / AdHoc

Set this according to the system or leave as

is.

Set this according to your network.

Set this according to your network or use

default.

Set this according to your network.

Auto / Manual. set this according to the way