diLUSSO OV607BBL Manuel d'installation et d'utilisation - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} diLUSSO OV607BBL. diLUSSO OV607BBL 14 pages.
Imprimer la page
8) REPLACING THE OVEN BULB
Once the oven has been electrically disconnected, unscrew the glass protection cap and the bulb, replacing it
with another one suitable for high temperature 300 C.
It should be fit below points:
Voltage: 220-240Vac
Reassemble the glass cap and reconnect the oven.
9) TELESCOPIC RACKS ASSEMBLY
To assemble the telescopic arms :
Version 1.1
Power: 15W
E14
Remove the two frames, lifting them away from spacers A
Choose which shelf to use with the telescopic arms. Pay
attention to the direction in which the telescopic arms is to be
extracted. Position joint B and the joint C on the frame.
Secure the two frames with the guide rails using the holes
provided on the oven walls. The holes for the left frame are
situated at hole F1, F2, and the right frame at hole D1, D2.
Finally fit the frames on spacers A.
Page 12
Dec 2016