Crown DSi 8M Manuel d'utilisation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Crown DSi 8M. Crown DSi 8M 20 pages. Cinema system monitor
Également pour Crown DSi 8M : Manuel complémentaire (1 pages), Spécifications (2 pages), Spécifications (2 pages)

Imprimer la page

DSi 8M Cinema System Monitor

3 Installation (continued)

CINEMA PROCESSOR

DSi POWER AMPLIFIERS

Figure 3.1 Wiring DSi 8M Monitor Panel to DSi Ampliﬁ ers

Operation Manual

MAIN AUDIO

OUTPUTS

DSi-8M

OPTION CARD I/O

DB-25

CABLES

VGA

CABLES

L Biamp

C Biamp

R Biamp

Sw Amp

LS/RS Amp

Bsl/Bsr Amp

2. Connect cinema processor output to DSi 8M input.

See Figure 3-1. Use the male-female 25-pin D cable to connect the

output of the cinema processor to the Main input of the DSi 8M. If

"EX" channels are to be used, plug an additional male-female 25-pin

D cable from the Optional Outputs at the processor to the Optional

Inputs of the DSi 8M.

3. Make DIP switch settings.

Ls/Rs in Main Connector: Set switches 1-4 ON, 5-8 OFF.

Ls/Rs in Optional Connector: Set switches 5-8 ON, 1-4 OFF.

USL JSD-80 processor using:

Bsl/Bsr in Main Connector: Set switches A-D ON, E-O OFF.

Lc/Rc in Main Connector: Set switches A-O OFF.

Lc/Rc and/or Bsl/Bsr in Optional Connector: Set switches E-H ON,

A-D OFF, J-O OFF.

Dolby

CP-650 processor using:

Le/Re in Optional Connector: Set switches E-H ON, A-D OFF, J-O

OFF.

Lm/Cm/Rm in Optional Connector: Set switches J-O ON, A-H OFF.

page 9