Motorola CLP1040 Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola CLP1040. Motorola CLP1040 48 pages.
Imprimer la page
2.3
Bluetooth Wireless Accessory
This section provides information regarding bluetooth wireless accessory.
2.3.1
Adding Bluetooth Headset
The following are the steps for initial pairing
Prerequisites: Turn the radio off.
Procedure:
1 Put the bluetooth headset in pairing mode. Refer to your Bluetooth headset instructions leaflet.
2 Press and hold the PTT button and Power button simultaneously until your radio shows the blue
LED.
Table 1: LED Configuration
User Mode
Bluetooth Pairing Mode
Pairing Successfully
Bluetooth Disconnected
Pairing Fail or Timeout
NOTE: The Bluetooth feature is disabled when the wired audio accessory is plugged into
the accessory connector on the CLP radio.
2.3.2
Reconnecting to the Last Connected Bluetooth Headset
Prerequisites: Ensure the Bluetooth headset is turned on.
Procedure:
1 Turn the radio off.
2 To turn on the radio, press the Power button.
LED Status
Last connection-fast blinking
blue
Add or erase - solid blue
Blue/purple blinks for 5 sec-
onds
Red/purple blinks until the
radio reconnects
Red/purple blinks until the
radio reconnects
68012000044-ED
Chapter 2 : Getting Started
Color
13