Motorola GP280 Manuel de l'utilisateur - Page 13
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola GP280. Motorola GP280 46 pages. Professional radio, power distribution and controller
Également pour Motorola GP280 : Informations sur les services (32 pages), Informations sur les services (30 pages), Manuel de l'utilisateur (46 pages), Informations sur les services (30 pages)
Imprimer la page
Symbol
Name and Description
Programming/Viewing Mode
Indicates when the radio is in the programming
K
or viewing mode;
ON = IN VIEWING MODE
BLINKING = IN PROGRAMMING MODE.
Battery Level Indicator
Shows the remaining charge in your battery,
P
based on how many bars are displayed.
Flashing, indicates flat battery.
Alert Tone Indications
Your radio generates a number of audible tones to
indicate radio operating conditions:
•
Low Battery – A low-battery condition is indi-
cated by a high-pitched, "chirp-chirp" when the
PTT switch is released following a transmission.
•
Successful Power-Up – A short, medium-pitched
tone when the radio is first turned on indicates
that the radio has passed its power-up self test
and is ready for use.
•
Unsuccessful Power-Up – A short, low-pitched
tone when the radio is first turned on indicates
that the radio has failed its power-up self test
and is not ready for use. Contact your service
representative for service.
•
Transmit on Receive-Only Mode – If you press
the PTT switch while tuned to a "receive-only"
mode, you will hear a continuous, low-pitched
alert tone, indicating that no transmission is
possible on this mode. This tone will continue
until the PTT switch is released.
•
Transmit Inhibit on Busy Mode – If you press the
PTT switch while the mode is busy, you will hear
a continuous, low-pitched alert tone, indicating
that no transmission is possible on this mode.
This tone will continue until the PTT switch is
released.
•
Transmit Inhibit on Flat Battery – If you press the
PTT while the battery is flat, you will hear a con-
tinuous, low pitched alert tone, indicating that
transmission is impossible.
•
Invalid Mode – A continuous, low-pitched tone is
heard when an invalid or unprogrammed
operation is attempted on the radio.
•
Valid (Good) Key Press – A short, medium-
pitched tone when a keypad key is pressed
indicates that the key press was accepted.
•
Invalid (Bad) Key Press – A short, low-pitched
tone when a keypad key is pressed indicates
that the key press was rejected.
•
Failsoft (Trunked Systems Only) – A faint "beep-
ing" tone every ten seconds indicates that the
radio is operating in the failsoft mode.
English
9