Dilux AP5712C Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Dilux AP5712C. Dilux AP5712C 8 pages. Decorative lighting – spacing matching series

Imprimer la page
Cutting Instruction
1
According to the length of the multiple of the strip light minimum cutting unit,
measure the aluminum profile and mark the area need to be cut, and the cutting
blade is biased toward the portion to be cut.
2. Cautions：
 It is recommended to slow down the speed when cutting. If the speed is too fast, the mask will be
damaged.
 The inner profile do not install with strip light when cutting.
 Fix it firmly when cutting, the fracture after cutting should be flat and not skewed. Round off the
fracture, ensure there is no burr, and the metal debris in the profile should be cleaned.
 Recommended cutting speed 1000-1200rpm