Motorola TLKR T60 Manuel du propriétaire - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Motorola TLKR T60. Motorola TLKR T60 12 pages.
Également pour Motorola TLKR T60 : Manuel du propriétaire (12 pages), Manuel du propriétaire (13 pages)
Imprimer la page
Room Monitor
Enables your radio to detect voice/noises (according to the
sensitivity level set) and transmit back to the listening radio
without pushing the PTT button. The monitoring radio is not
able to receive any transmissions in this mode.
To turn Room Monitor ON:
1. MENU/
to enter Mode Menu. Advance until
2.
or
to the desired room monitor sensitivity level.
Note: Use level 1 in quiet environments. Use level 5 in very
noisy environments.
3. SEL/
to turn ON room monitor.
MENU/
to turn OFF Room Monitor.
Note: When the voice/noise in the monitored room
continues for more than 60 seconds, the monitoring
radio stop monitoring for 5 seconds, and resumes.
Up Timer
Enables your radio to time up to 39 minutes 59 seconds. You
can receive incoming calls in this mode.
To use up timer:
1. MENU/
to enter Mode Menu. Advance until
2. SEL/
to select the Up Timer.
3.
to start the Up Timer.
4. MENU/
,
, MON or PTT to stop or reset up timer.
Key Lock
Press and hold SEL/
Press and hold SEL/
keypad.
LCD Backlight
blinks.
The LCD display will automatically illuminate for 10 seconds
after any button is pressed (except for PTT).
Monitor Mode
Enables you to listen for weak signals on the current channel.
To turn the Monitor Mode ON:
1. Press the MON button for brief listening. The
2. Press and hold the MON button for 2 seconds for continuous
listening. The
To turn the Monitor Mode OFF:
Press the MON, button to return to "Normal" mode. The
stops blinking.
Roger Beep
Sounds to indicate the end of a PTT or VOX transmission. It
blinks.
can be heard through the speaker when Key Beep is on. It
cannot be heard through the speaker if Key Beep is turned off.
Press and hold the
the Roger Beep ON. Repeat the step to turn Roger Beep OFF.
Automatic Power Save
For better battery life, your radio is designed to switch to Power
Save mode when there has been no transmissions after 3
seconds. The radio can receive transmissions in this mode.
until
appears to lock the keypad.
until
disappears to unlock the
icon continues to blink.
button while turning the radio ON to turn
icon blinks.
icon
7