Motorola MBP15 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola MBP15. Motorola MBP15 32 pages. Digital baby monitor
Également pour Motorola MBP15 : Manuel rapide (2 pages), Manuel de l'utilisateur (32 pages), Manuel de l'utilisateur (34 pages)

Imprimer la page

2. Place the parent unit on the charger. The red charging light

illuminates.

NOTE

It takes about 15 hours to charge the unit.

3. Press

. The LCD display will illuminate.

4. Press and hold

2.5

Link

NOTE

Do not place the baby unit or cables in the cot or within arm's reach of the

baby (the unit should be at least 1 metre away).

When using the baby monitor for the first time, it is advised to test the

connection.

• Install the parent unit in the same room as the baby unit, but make

sure there is at least 1 metre between the 2 units to avoid feedback

howling.

• When both units are switched on, the parent unit will search for the

baby unit.

• The green link LED on the parent unit will flash until the parent unit is

connected with the baby unit.

Once the link is established, the LED will stop flashing.

• The sound captured by the microphone on the baby unit will be

audible on the parent unit.

• The detected sound level is indicated by the LEDs near the top of the

parent unit.

• When the sound reaches the maximum level, a beep will be heard.

• When the connection is established, move the parent unit to the room

you want to monitor from, but within the operational range.

• When there is no connection or out of range, the parent unit emits a

warning beep every 3 seconds and the green link LED on the parent

unit will flash.

• Move the parent unit closer until the link is re-established.

to switch off the parent unit.

Getting started