Epson Equity LT-286e Bulletin d'information sur les produits - Page 11
Parcourez en ligne ou téléchargez le pdf Bulletin d'information sur les produits pour {nom_de_la_catégorie} Epson Equity LT-286e. Epson Equity LT-286e 15 pages. Proper method for running benchmark and diagnostics programs using the manzana driveport third party memory boards
Également pour Epson Equity LT-286e : Manuel d'information sur les produits (7 pages)
Imprimer la page
Q23.
What does the HDDPSAVE program do?
A.
If you are running the computer from battery and you do not need to use
the HDD, you can use the HDDPSAVE utility to turn off the HDD to prolong
the battery's charge.
Q24.
Is it possible to perform a low - level (physical) format on the HDD?
A.
All LT- 286e HDDs are physically formatted at the factory before shipment.
However! in the event of excessive data or persistent disk errors, the
Diagnostics program from the Reference diskette can be used to refresh
the physical format. This will also optimize the drive's performance by
selecting a 2:1 interleave.
Q25.
Can I remove the HDD after the computer is powered up?
A.
No. The computer should be turned off before installing or removing any
devices.
Q26.
What other HDDs can I use with the LT - 286e? Can I use an external
HDD?
A.
Only the specified Epson HDDs can be used at this time.
Q27.
How many HDDs can be used with the LT - 286e?
A.
Only one of the Epson 20 or 40MB drives is supported at any given time.
LCD Display
Q28. Can I replace the fluorescent element in the backlit screen?
A.
N
. If it needs replacing an Epson Customer Care Center will replace the
O
internal LCD panel.
Q29. What is the expected lifetime of the fluorescent backlight element?
A.
The backlight element, like any kind of light bulb, will gradually lose
brightness. "Lifetime" for the backlight element is defined as the time it
takes the element to fall to half the original brightness. This works out to
be approximately 10,000 hours at maximum brightness usage.
PSB No: S-0104
Page:
5 of 7