Epson ExpressStation Bulletin d'information sur les produits - Page 9

Parcourez en ligne ou téléchargez le pdf Bulletin d'information sur les produits pour {nom_de_la_catégorie} Epson ExpressStation. Epson ExpressStation 11 pages. Product information guide
Également pour Epson ExpressStation : Manuel de configuration (26 pages), Manuel d'information sur les produits (9 pages)

Epson ExpressStation Bulletin d'information sur les produits
MEMORY
Q14. What is the standard memory configuration and maximum amount of
memory that can be used in the system?
A.
The ExpressStation comes with one 4 MB. SIMM installed on the main
system board. You can install additional SlMMs to increase your
computer's memory to 32MB. You can install one, two, or four SIMMs,
you cannot install three SIMMs. There is a total of four SIMM sockets on
the motherboard.
The Epson ExpressStation can accept 1 MB, 2 MB, 4 MB, and 8 MB
SlMMs up to 32 MB (when 8 MB SlMMs are available); SlMMs must be
80ns or faster, 36-bit, 72-pin, gold leaded, fast page mode type.

MASS STORAGE

What factory drive configurations are offered with the ExpressStation?
Q15.
A.
The Epson ExpressStation comes in four configurations. All four
configurations come with a 1.44MB floppy drive. The 486SX/25 and the
486DX/33 models can be sold without a hard drive. The 486SX/25
computer has a option to be shipped with a Quantum LPS120AT (120MB)
IDE hard drive. The 486DX/33 computer has an option to be shipped with
a Maxtor 340MB SCSI drive.
When would I use the SCSI drivers?
Q16.
A.
There are several instances that you would want to use the drivers. Some
of the most common uses are as follows:
The SCSI drivers should be installed if you will be using Windows or DOS
n
and an expanded memory manager such as EMM386.EXE or QEMM386.
n
The system has more than two hard disk drives.
If you have installed a removable hard disk drive, such as the Syquest
n
model SQ555, or you have installed a SCSI tape drive, CD-ROM, or other
non-disk SCSI device.
If you use programs such as a laser scanner driver that accesses the
n
SCSI BIOS via the CAM interface.
PSB No: S-0147
Page: 8 of 9