Motorola C1202 Manuel de l'utilisateur - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola C1202. Motorola C1202 44 pages. C12 series
Imprimer la page
26
6.4
Dial mode
Your C12 is set to tone dialling. You should only need to change this if
connected to an older type of switchboard / PBX which requires
pulse dialling.
1. Press
, scroll
DIAL MODE
2. Scroll
to
3. Press
or
6.5
Recall mode
Depending on your country and network operator, your C12 has the recall
time set as 600 ms (TIMED BR,2). It is unlikely that you need to change this
setting unless advised to do so.
1. Press
, scroll
RECALL
2. Scroll
to
3. Press
or
time) and press
6.6
Restore default settings
You can restore your C12 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the
Phonebook and Calls list. All handset and base settings will also be reset.
1. Press
, scroll
DEFAULT
2. Scroll
to
3. Enter the 4 digit PIN code (default = 0000) and press
shows
CONFIRM
4. Press
to confirm or
will restart automatically.
6.7
Emergency default
If you have lost your PIN code, you can still restore your C12 to its
default settings.
1. Remove the batteries from the handset.
2. Press and hold
DEFAULT.
shows
3. Press
to confirm. Your C12 will restart automatically.
Base settings
to
SETUP
and press
and press
TONE DIAL
to select
SETUP
to
and press
and press
to select
TIMED BR,1
to confirm.
SETUP
to
and press
and press
?.
to return to the previous menu. Your C12
while replacing the batteries. The display
.
.
PULSE DIAL
or
and press
.
.
(short flash time) or
.
.
to confirm.
TIMED BR,2
(long flash
. The display