Motorola CD4002 Manuel de l'utilisateur - Page 31
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola CD4002. Motorola CD4002 40 pages.
Imprimer la page
9.
Help
The
is not scrolling during charge
•
Bad battery contact – move the handset slightly.
•
Dirty contact – Clean the battery contact with a cloth moistened with alcohol.
•
Battery is full – no need to charge.
No dialling tone
•
No power – check the connections. Reset the phone: unplug and plug back in
the mains.
•
Batteries are empty – charge the batteries for at least 16 hours.
•
You are too far from the base – move closer to the base.
•
Wrong line cable – use the line cable provided.
•
Line adaptor (when needed) is not connected to the line cord – connect the
line adaptor (when needed) to the line cord.
Poor audio quality
•
The base is too close to electrical appliances, reinforced concrete walls or
metal doorframes – move the base at least one metre away from any
electrical appliances.
The
is blinking or has disappeared
•
Handset is not registered to the base – register the handset to the base.
•
You are too far from the base – move closer to the base.
No ring tone
•
The ring tone is deactivated.
•
Increase the volume.
•
Make sure the Call Block mode is switched to off.
Caller ID service does not work
•
Check your subscription with your network operator.
A phonebook entry cannot be stored
•
The phonebook is full. Delete an entry to free memory.
No display
•
Try recharging the batteries.
•
Try disconnecting and connecting the base power supply.
•
If LED is not lit up, then try disconnecting and connecting the base
power supply.
Unable to register another handset
•
Maximum number of 4 handsets has been reached.
The display shows Searching. You must de-register a handset in order to
•
register a new one.
Noise interference on your radio or television
•
Your base or charger may be too close. Move it as far away as possible.
Help
31