Motorola D1002 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola D1002. Motorola D1002 45 pages. Digital cordless phone
Également pour Motorola D1002 : Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (50 pages)

Imprimer la page

1. Getting started

WARNING

Do not place your D1000 in the bathroom or other humid

areas.

Location

You need to place your D1000 base within 2 metres of the

mains power socket and telephone socket so that the cables

will reach.

Make sure it is at least 1 metre away from other electrical

appliances to avoid interference. Your D1000 works by

sending radio signals between the handset and base. The

strength of the signal depends on where you place the base.

Putting it as high as possible ensures the best signal.

HANDSET RANGE

The D1000 has a range of up to 300 metres outdoors when

there is a clear line of sight between the base and handset.

Any obstruction between the base and handset will reduce

the range significantly. With the base indoors and handset

either indoors or outdoors, the range will normally be up to

50 metres. Thick stone walls can severely affect the range.

SIGNAL STRENGTH

The

icon on your handset indicates when you are in

range. When out of range of the base, the screen shows

SEARCHING

and the

flashes.

If you are on a call, the line will hang up if the handset moves

out of range of the base. Move back within in range. The

handset will automatically re-connect to the base.

Setting up

IMPORTANT

The base station must be plugged into the mains power at all

times. Do not connect the telephone line cord into the wall

socket until the handset is fully charged. Only use the power

and telephone cables supplied with the product.

WHICH POWER ADAPTOR?

The power adaptor with a clear connector is for the base unit

and the power adaptor with a red colour connector is for the

charger unit.

Connecting up the base

Plug the mains power cable with the clear connector into the

socket marked

on the underside of the base and plug

Getting started