Motorola D512 Manuel de l'utilisateur - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola D512. Motorola D512 45 pages. Digital cordless telephone with digital answering machine
Également pour Motorola D512 : Manuel de l'utilisateur (46 pages)

Imprimer la page
Motorola D512 Manuel de l'utilisateur
do not press 1 within 8 seconds, the machine hangs up.
When you press 1, you will hear the main menu.
Simply follow the instructions as announced:
'To play all messages press 2'.
'To play new messages press 3'.
'To skip back during messages press 4'.
'To delete during messages press 5'.
'To skip forward during messages press 6'.
'To set answer on or off press 7'.
'To hear the outgoing message menu press 8'.
'To set a new security code press 9'.
'To hear main menu again press 1'.
When the last message is played you will hear, 'End of
messages'.
11.2

Set the security PIN code

Using the handset:
m
TAM SETTINGS
1. Press
, scroll to
d
REMOTE CODE
2. Scroll
to
will display the current code.
3. Enter a new code and then press
11.3

Check security code

D
1. Press
at the base. The security code is announced.
36
m
and press
.
m
and press
. The handset
m
to confirm.

12. Help

No dial tone
• Use only the telephone line cord supplied.
• Check that the telephone line cord is connected properly.
• Check that the mains power is connected properly and
switched on.
No display
• Check that the batteries are inserted correctly and fully
charged. Use only approved rechargeable batteries
supplied.
• Check that the handset is switched on. Press and hold
R
.
• Reset the base by removing the batteries and
disconnecting the mains power. Wait for around 15
seconds before connecting it again. Allow up to one
minute for the handset and base to synchronize.
icon flashes
• Handset is out of range. Move closer to the base.
• Make sure that the handset is registered to the base, see
page 28.
• Check that the mains power is connected properly and
switched on.
Keypad does not seem to work
• Check that the keypad lock is not on, see page 17.
Help