Motorola D512 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola D512. Motorola D512 46 pages. Digital cordless telephone with
digital answering machine
Également pour Motorola D512 : Manuel de l'utilisateur (45 pages)
1. Plug the telephone line cord into the socket marked
on the underside of the base.
2. Plug the power adaptor with clear connecter into the
socket marked
on the underside of the base and
plug the other end into the mains power wall socket.
Switch on the mains power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset
and insert the 2 x rechargeable Ni-MH battery cells
supplied. Please note the '+' and '-' markings inside the
battery compartment and insert in the correct direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place
the handset on the base to charge for at least 24 hours
continuously.
4. When the handset is fully charged,
appear steady on the display. Plug the other end of the
telephone line cord (make sure that one end is already
plugged into the base) into the telephone wall socket.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry
out this process for all the handsets and chargers.
Getting started
1. Plug the power adaptor with red connecter into the
socket marked
and plug the other end into the mains power wall socket.
2. Remove the battery cover from the back of the handset
and insert the 2 x AAA NiMH rechargeable batteries
supplied. Please note the '+' and '-' markings inside the
battery compartment and insert in the correct direction.
icon will
3. Slide the battery cover back into place.
4. If you are charging the batteries for the first time, place
the handset on the charger to charge for at least 24
hours continuously.
5. When the handset is fully charged,
appear steady on the display.
The display will show the time and handset number
(e.g. 2) to indicate that it is registered to the base.
on the underside of the charger
icon will
7