Motorola IT.5.1XI Manuel - Page 39
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Motorola IT.5.1XI. Motorola IT.5.1XI 48 pages.
Imprimer la page
11. Help
No dial tone
•
Use only the telephone line cord supplied.
•
Check that the telephone line cord is connected properly.
•
Check that the mains power is connected properly and switched on.
No display
•
Check that the batteries are inserted correctly and fully charged. Use only
approved rechargeable batteries supplied.
•
Check that the handset is switched on. Press and hold
•
Reset the base by removing the batteries and disconnecting the mains power.
Wait for around 15 seconds before connecting it again. Allow up to one minute
for the handset and base to synchronize.
icon flashes
•
Handset is out of range. Move closer to the base.
•
Make sure that the handset is registered to the base.
•
Check that the mains power is connected properly and switched on.
Keypad does not seem to work
•
Check that the keypad lock is not on.
icon is not scrolling during charge
•
Adjust the handset slightly on the base.
•
Clean the charging contacts with a cloth moistened with alcohol.
•
Check that the mains power is connected properly and switched on.
•
The battery is full. When the handset is fully charged,
on the display.
No Caller ID
•
Check your subscription with your network operator.
•
The caller may have withheld their number.
•
The record cannot be found in your phonebook. Check that you have the
correct name / number stored in your phonebook, with the full area code.
I have forgotten my PIN!
•
Remove one battery, press and hold the star button on the handset and
replace the battery. The display shows
automatically reset and the PIN will default back to 0000.
Cannot register a handset to the base
•
You can register up to a maximum of 4 handsets to a IT.5XI base. You must
de-register a handset in order to register a new one.
Help
e
Master
Reset, press OK. The handset will
.
will appear steady
39