Motorola L401 Manuel de l'utilisateur - Page 30

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola L401. Motorola L401 38 pages. Digital
Également pour Motorola L401 : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (8 pages), Manuel de démarrage rapide (8 pages)

Imprimer la page
Motorola L401 Manuel de l'utilisateur
Doc Title
:
Product Data – User's Guide
Model
:
L401 series & L301 series

10 HELP

Charging
The <Battery icon> is not scrolling when the handset is placed on the base
• Bad battery contact – move the handset slightly.
• Dirty contact – Clean the battery contact with a cloth moistened with alcohol.
• Battery is full – no need to charge.
Calls
No dial tone
• No power – check the connections. Reset the phone: unplug and plug back in the electrical outlet.
• Batteries are empty – charge the battery pack for at least 24 hours.
• You are too far from the base – move closer to the base.
• Wrong telephone line cord – use the telephone line cord provided.
• Line adapter (when needed) is not connected to the telephone line cord – connect the line adapter (when needed)
to the telephone line cord.
Poor audio quality
The base is too close to electrical appliances, reinforced concrete walls or metal doorframes – move the base away
from any electrical appliances.
No ring tone
• The ring tone is deactivated.
• Increase the volume.
Caller ID service does not work
Check your subscription with your network operator.
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free memory.
Display
No display
• Try recharging or replacing the battery pack.
• Reset the telephone base. Unplug the unit's electrical power, then plug it back in.
• If LED is not lit up, then try to unplug the unit's electrical power, then plug it back in.
Registration
Unable to register another handset
• Maximum number of 5 handsets has been reached.
• The display shows
NOT
When the handset lost its link with the base during a call
• Check the power cord is connected properly into the telephone base.
• Check the power adapter is connected properly into an electrical outlet.
• Move the cordless handset closer to the telephone base. It may be out of range.
• Reset the telephone base by unplugging the unit's electrical power. Wait for around 15 seconds and plug it back
in again. Allow up to one minute for the cordless handset and the telephone base to synchronize.
Interference
Noise interference on your radio or television
Your base or charger may be too close. Move it as far away as possible.
Answering machine (for L401 series only)
Answering machine does not record messages
• Switch the answering machine on.
• The memory may be full. If so, you will need to delete some messages.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
REGISTERED. You must unregister a handset in order to register a new one.
Revision :
Page(s) :
R.00
30 of 38