Motorola V3 Manuel d'entretien - Page 25

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Motorola V3. Motorola V3 48 pages. Digital wireless telephone
Également pour Motorola V3 : Manuel de l'utilisateur (11 pages), Manuel de l'utilisateur (34 pages), Manuel (32 pages), Fiche technique du produit (2 pages), Instructions spéciales (2 pages), Manuel de démontage (30 pages), Manuel de l'utilisateur (20 pages), Manuel (11 pages)

Level 1 and 2 Service Manual

6809485A72-O

Carefully rotate the rear housing away from the front housing and flip

assembly.

FLEX Connector

Figure 6. Removing the Rear Housing Assembly

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when

handling.

Use the disassembly tool to unseat the flex connector from it's socket.

Lift the rear housing assembly away from the phone.

To replace, carefully align the flex connector to it's socket on the rear housing

assembly, then gently press down on the flex connector until it is properly

seated in it's socket.

Rotate the rear housing assembly so it sits over the phone.

Align the housing latches with the corresponding openings on the front

housing. Gently press the housings together until the catches snap into place.

10. Replace the 2 housing screws and tighten to a final torque setting of 1.5 inch

pounds. Do not over tighten.

11. Replace the antenna, SIM, battery, and battery cover as described in the

procedures.

July 30, 2004

Disassembly Tool

Disassembly

040710o