Motorola CB PRO Manuel de l'utilisateur - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola CB PRO. Motorola CB PRO 2 pages. Alpha series radio
Imprimer la page
Scan
Scan allows you to monitor multiple channels and receive calls that are transmitted on them.
Start
Ch. 2
Ch. 3
Ch. 4
Ch. 14
Ch. 1
Scan
Home
Ch. 16
Ch. 15
During scan, when activity is detected that meets the unsquelch condition, the radio stops scanning
and switches to that channel; the G indicator is illuminated, and the channel number is displayed.
When no activity is detected for a pre-set time, the radio resumes scanning.
The radio transmits on the Home Channel (the channel, the radio was monitoring, before the user
activated scanning), if PTT is pressed during scanning. If the radio has stopped scanning, and
changed to a particular channel, all transmit and receive activities is performed on that channel.
• Press the Scan button to begin channel scanning. The G indicator blinks to indicate that the radio
is scanning. The LCD Screen shows the Home Channel where the scan began.
• Press the + button to scan the channels in the ascending order, and the - button to scan in the
descending order.
• Press Scan button to stop scanning.
Deleting a Nuisance Scan Channel
A channel with unwanted activity is called a Nuisance Channel. You can remove a Nuisance Channel
from the scan list temporarily. To remove a Nuisance Channel
• Press the Nuisance Channel Delete button, when your radio stops on a Nuisance Channel. A high-
pitched tone is heard.
You cannot remove the Home Channel from the scan list. If attempted, a low-pitched tone is heard,
and no action is taken.
To reinstate the deleted channel(s) into the scan list, restart scan, or simply turn off your radio and turn
it on again.
Battery Gauge Indicator Details
Indicator
Battery Level
Good
Sufficient
Low
Very Low
Need to Recharge
your battery
(flashing)
Frequencies Available for Your Radio
Ch. Freq. (Hz)
Ch.
Freq. (Hz) Ch.
Freq. (Hz)
Ch.
Freq. (Hz)
1
9
476.625
17
476.825
25
477.025
*
476.425
2
*
10
476.650
18
476.850
26
477.050
476.450
3
*
11
476.675
19
476.875
27
477.075
476.475
4
*
12
476.700
20
476.900
28
477.100
476.500
5
*,†
13
476.725
21
476.925
29
477.125
476.525
6
*
14
476.750
22
‡
30
477.150
476.550
476.950
7
*
15
476.775
23
‡
31
477.175
476.575
476.975
8
*
16
476.800
24
477.000
32
477.200
476.600
*. Repeater Channels.
†. Frequencies dedicated for emergency use only.
‡. Receive only frequencies.
LED Indicators
LED Colour
State
Indication
Red
Illuminated
Radio is transmitting.
Blinking
Battery voltage is low.
Green
Illuminated
Radio is receiving.
On/Off and Volume Knob
• If the radio is off, turn this knob clockwise to turn
the radio on.
• If the radio is on, turn this knob counter-clockwise
to turn the radio off.
• Turn this knob clockwise to increase the volume.
• Turn this knob counter-clockwise to decrease the
volume.
Monitor Button
• Used to monitor the channel for any
activity; squelch is disabled.
Push-to-Talk (PTT) button
• Press and speak to microphone to send
message.
• Release and listen to receive messages.
Microphone
• Speak into the microphone when send-
ing message.
+/- Button
• Used to select a channel in Normal
Mode.
• Used to select a parameter in Program-
ming Mode.
• Used to change the scanning direction.
Ch.
Freq. (Hz)
33
477.225
34
477.250
35
†
477.275
36
477.300
Speaker
37
477.325
• You will hear received messages through
the speaker.
38
477.350
39
477.375
40
477.400
LCD Screen
• Displays selected channel, programming parameters, status messages and any error or information messages.
LCD
Description
Function
Indicator
L
Keypad lock indicator
Illuminates when your keypad is locked.
Battery level indicator
Shows remaining charge in battery based on how many bars are displayed (see
"Battery Gauge Indicator Details").
Power level indicator
"L" illuminates to indicate radio transmits in low power; "H" illuminates to
indicate radio transmits in high power; "E" illuminates to indicate radio is on
economy low power.
Monitor indicator
Illuminates when monitoring a selected channel.
C
K
Programming Mode
Illuminates when in Programming Mode.
indicator
G
Scan indicator
Blinks when scan is activated. Illuminates when there is some activity on a
channel.
Signal Strength Indicator
Shows the signal strength. Six bars indicate the strongest signal.
Talkaround Indicator
Shown when the user presses the Talkaround programmable button to enable
J
Talkaround mode (user chooses NOT to use the repeater, but to enable point-
to-point communications). Not shown when user presses the Talkaround
programmable button again to disable Talkaround mode.
Accessory Connector
• Used to connect compatible
accessories to your radio.
Function Buttons (A, B, C, D)
• The following functions are assigned as short press (press and release) or long press (press and hold for 1 sec-
ond).
Button
Function
Backlight
Turns on the backlight display or toggles backlight display between On and Off, depending on
programmed settings (see "Programming Mode").
*
Locks or unlocks all buttons except PTT, Monitor and On/Off/Volume Knob.
Keypad Lock
Nuisance Channel
Removes unwanted channel(s) temporarily from scan list during scan.
Delete
*
Selects required power level: High, Low, or Economy Low.
Power Select
Starts or stops channel scan.
*
Scan
*
Selects desired squelch level. Use the +/- button to choose desired level (Level 0 will
Squelch Level
unsquelch radio unconditionally, whereas Level 15 will set tightest squelch).
No Operation
No function is programmed to this button.
Talkaround
Enables or disables radio to transmit in Talkaround mode.
*. Parameter values are preserved, even after the radio is turned off.
• The default functions assigned to your radio are described in the table below.
Press Type
Button A
Button B
Button C
Short Press
Scan
Squelch Level
Talkaround
Long Press
Nuisance Channel
Power Select
Keypad Lock
Delete
Programming Mode
This mode allows you to change feature parameters to enhance the use of your radio.
Entering Programming Mode
If your radio is turned on, turn it off. Press and hold the Monitor button, and turn on your
radio. A ringing tone is heard, indicating that your radio is in Programming Mode. The K
indicator illuminates and RW is displayed.
Accessing Programming Mode Parameters
Programming Mode parameters are grouped into two main categories: RW (Radio Wide)
and Channel (CH 001 - CH 040). Use + or - to select RW or the desired channel:
RW <--> CH 001 <--> CH 002 <--> .... <--> CH 040
Once you have made the appropriate selection, press PTT or the Monitor button to scroll
through the features available. Press the +/- button to scroll through the parameters for
each feature.
Features available Radio Wide (default settings shown in bold where applicable):
Feature
Range
Squelch Level
SQL-00, ..., SQL-06, ...,
Select low level when you need to receive very weak
(SQL-XX)
SQL-15
signal, and select high level when the communications dis-
tance is near.
Scan List 1
1-01-XXX, ..., 1-16-XXX,
You can include up to 16 channels in the scan list. When
(SCANLST1)
XXX denotes channel
scanning is activated, only these 16 channels are scanned.
number.
Press + or - to move from one scan list member to another.
To include a channel into the scan list, first, use Button A to
scroll in the ascending order, or Button C to scroll in the
descending order to the required channel; then, press PTT
to include this channel in the scan list.
To erase a channel from the scan list, press Button D.
Time Out Timer
TOT-OFF, TOT-001, ...,
This determines the maximum duration (in minutes) that
(TOT-XXX)
TOT-010
you can transmit continuously.
Battery Saver
BS-OFF,
Battery Saver helps to extend your battery life. When
(BS-XXXX)
BS-NORM,
enabled, it turns off radio receiver circuitry periodically
BS-ENH
when no activity is detected. BS-NORM (Normal) turns off
the radio less frequently. BS-ENH (Enhanced) turns off the
receiver for a longer duration; select this if you want to
maximize battery saving.
Battery Type
BT-NIMH,
Selects the type of battery that your radio uses. For CB
(BT-XXXX)
BT-NICD,
PRO models, only NIMH (Nickel Metal Hydride) battery
BT-ALK
is available. NICD (Nickel Cadmium) or ALK (Alkaline)
batteries are not applicable.
Alert Tone Volume
BEEP-OFF, BEEP-1,
Selects the alert tone volume needed. Select BEEP-OFF,
(BEEP-X)
BEEP-2,
if you require quiet operation, or BEEP-3, if working in a
BEEP-3
noisy environment.
Prime Channel
PRM-OFF, PRM-001, ....,
The Prime Channel is the channel that you wish to spend
Select
PRM-040
most of your time monitoring. The radio will always switch
(PRM-XXX)
back to the Prime Channel if it is idle for more than the pre-
programmed hang-time in other channel, and each time the
radio is turned on.
Backlight Select
LGT-AUTO, LGT-TOGL
Selecting LGT-TOGL makes the Backlight button a toggle
(LGT-XXXX)
to control the ON/OFF status of the LCD backlight. Select-
ing LGT-AUTO turns off the backlight automatically, if
there is no keypress for more than 5 seconds. Pressing the
Button D
Backlight button prolongs illumination time.
Backlight
No Operation
Features available per Channel (default settings shown in bold):
Feature
Range
Channel Receive
000, 001, ..., 126, PL1,
This is the PL or DPL code that the channel will use to
PL/DPL
PL2, PL3
unsquelch the receive message. 000 indicates that no PL/
(RPL-XXXX)
DPL is used for receive, i.e., radio operates in carrier
squelch mode. Press + or - to select the desired PL/DPL.
Channel Transmit
000, 001, ..., 126, PL1,
This is the PL or DPL code that the channel will use to
PL/DPL
PL2, PL3
transmit the message. 000 indicates that no PL/DPL is used
(TPL-XXXX)
for transmit. Press + or - to select the desired PL/DPL.
Exiting Programming Mode
Turn off the radio to exit Programming Mode.
Remarks
Remarks