Motorola CDM1250 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola CDM1250. Motorola CDM1250 50 pages. Cdm-series control station
Également pour Motorola CDM1250 : Manuel d'entretien et d'installation (32 pages)
Imprimer la page
Method 3 (if programmed by your dealer [see
pages 6 - 7]. Enhanced keypad microphone
required.)
1 Press the Direct Channel Access button.
2 Enter the desired channel using the enhanced
keypad microphone.
3 Press the Direct Channel Access button to
confirm your selection.
SENDING A CALL
1
Turn your radio on.
y
z
2
or
to select the desired channel.
3
Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT
to talk; release it to listen.
If your system uses the request-to-talk feature,
use the following method to send a call:
1
Turn your radio on.
y
z
2
or
to select the desired channel.
3
Press the PTT (for priority requests to talk, the
PRTT) button and wait for the talk permit tone.
4
Hold the microphone vertically 1 to 2 inches
(2.5 to 5 cm) from your mouth. Press the PTT
to talk; release it to listen.
RECEIVING A CALL
1
Turn your radio on.
2
Adjust the radio's volume, if necessary (see
page 11).
3
Select the desired channel.
4
To respond, hold the microphone vertically 1
to 2 inches (2.5 to 5 cm) from your mouth.
Press the PTT to respond to an incoming call;
release it to listen.
13
English