Motorola GM160 Manuel d'entretien de base - Page 40
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien de base pour {nom_de_la_catégorie} Motorola GM160. Motorola GM160 46 pages. Professional radio
Également pour Motorola GM160 : Informations sur les services (34 pages), Manuel de l'utilisateur (44 pages), Informations sur les services (32 pages), Informations sur les services (32 pages), Manuel de l'utilisateur (44 pages)
Imprimer la page
4-6
Test Name
Reference
Frequency
Rated Audio
Distortion
Sensitivity
(SINAD)
Noise Squelch
Threshold
(only radios
with
conventional
system need
to be tested)
* See Table 4-4
Table 4-6 Receiver Performance Checks
Communications
Analyzer
Mode: PWR MON
4th channel test frequency*
Monitor: Frequency error
Input at RF In/Out
Mode: GEN
Output level: 1.0mV RF
4th channel test frequency*
Mod: 1kHz tone at
3kHz deviation
Monitor: DVM: AC Volts
As above, except to
distortion
As above, except SINAD,
lower the RF level for 12dB
SINAD.
RF level set to 1mV RF
As above, except change
frequency to a conventional
system. Raise RF level from
zero until radio unsquelches.
TRANSCEIVER PERFORMANCE TESTING
Radio
Test Set
TEST MODE,
PTT to
Test Channel 4
continuous
carrier squelch
(during the
output at
performance
antenna
check)
TEST MODE
PTT to OFF
Test Channel 4
(center), meter
carrier squelch
selector to
Audio PA
As above
As above
As above
PTT to OFF
(center)
As above
PTT to OFF
(center), meter
selection to
Audio PA,
spkr/ load to
speaker
out of TEST
As above
MODE; select
a conventional
system
Comment
Frequency
error to be
±150 Hz VHF
±150 Hz UHF
±150 Hz LB
Set volume
control to
8.12Vrms
Distortion
<5.0%
RF input to be
<0.3µV
Set volume
control to
3.16Vrms
Unsquelch to
occur at
<0.25µV.
Preferred
SINAD =
9-10dB