Motorola PRO5100 Manuel - Page 47

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Motorola PRO5100. Motorola PRO5100 49 pages. Motorola professional radio pro series

Sending a Call
1. Turn radio on and select appropriate zone and channel.
2. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,
and speak clearly into it.
3. Release PTT to listen.
Receiving a Call
1. Turn radio on and adjust volume to the desired level.
2. Select desired channel.
3. To respond to an incoming call, press PTT, hold the microphone 1 to 2 inches
(2.5 to 5 cm) from your mouth, and speak clearly into it.
Deleting a Nuisance Channel During Scanning
1. While radio is on a nuisance channel, hold down preprogrammed Scan button
until you hear a tone.
2. Release Scan button.
Making a Phone Call
1. Press Phone button, or select Phone from the menu.
2. If access code is not displayed, send access code if required.
3. Send phone number in one of the following ways:
• Press and release PTT to send last dialed number.
— or —
• when using enhanced keypad microphone only, press preprogrammed
Speed Dial button, followed by a keypad key (1–8), to access first nine num-
bers in your phone list. (Press PTT if buffered dial.)
— or —
• when using enhanced keypad microphone only, enter phone number using
the keypad. (Press PTT if buffered dial.)
4. Press PTT, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth,
and speak clearly into it.
Ending a Phone Call
1. Send deaccess code if required.
2. Press preprogrammed Phone button, or press the Exit key.
Sending and Cancelling an Emergency Alert
• To activate Emergency Alert , press preprogrammed Emergency button or
footswitch.
• To cancel, press and hold down Emergency button .
CDM1250
Record the functions for your radio's programmable buttons in the table
provided below. For further information, see page 4 of this User Guide.
Red/Yellow/Green
LED Indicators
LCD Screen
On/Off/Volume
Knob
Microphone
Jack
Programmable
Programmable
Button 2 (P2)
Button 1 (P1)
(Interchangeable)
(Interchangeable)
Button
Function
Short Press
Quick Reference Card
Channel Selector
(Up/Down)
Programmable
Button 3 (P3)
(Interchangeable)
Programmable
Button 4 (P4)
(Interchangeable)
MAEPF 26782 O
Long Press
Hold Down
Page