Motorola T600 FRS Manuel de démarrage rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Motorola T600 FRS. Motorola T600 FRS 4 pages.

NOTE: When the radio is on a 1.5 watt channel, the display shows Hi. When the radio is on a 0.5

watt channel, the display shows Lo.

2. Using the Volume/Scroll button, press "

example channel "6" for Palisades East.

3. Press the Push to Talk (PTT) button to save the channel setting or Menu/Lock button to

continue set up.

Configure the Tone on Your FRS Radio

The Tone setting on your FRS radio filters out all of the other traffic except the FRS radios configured to

your neighborhood Tone. It's like a "secret handshake" between the radios.

1. With the radio on, press Menu/Lock button until the Tone number starts to flash.

2. Using the Volume/Scroll button, press "

example tone "14" for Palisades East.

3. Press the PTT button to save the Tone setting or Menu/Lock button to continue set up.

Talking and Listening

Talking and listening to your neighbors using the FRS radios provides communications during an

emergency or for training and testing purposes.

1. To talk, press and hold the PTT button, pause for 2 seconds, talk calmly and clearly. When

transmitting, the TWO‐WAY icon blinks and Tx is shown. If it's a high‐power transmission, Hi is

shown. If it is a low power transmission, Lo is shown.

2. When you are finished talking, pause for 1 second and then release the PTT button.

3. When receiving, the TWO‐WAY icon blinks and Rx is shown.

NOTE: For maximum clarity, hold the radio two to three inches away from your mouth at an

angle and speak directly across the microphone. Do not cover the microphone while talking.

If You Can't Connect

A few very simple things can keep your FRS radio from connecting to others in the neighborhood

network.

1. Check the volume on the FRS radio. The volume could be turned off or so low you can't hear

your connections.

2. Confirm you have set your FRS Channel and Tone settings correctly. It's possible someone may

not have a Tone set (0) so they will hear traffic but nobody with a Tone set will hear them.

3. Move around and try connecting from different locations. Operating outside will provide the

best signal performance. The following illustration shows a group of neighbors successfully

connected and neighbors who cannot connect because of line‐of‐site limitations.

Lake Oswego Fire Department 300 B Avenue Lake Oswego, OR 97034

" or "

503‐635‐0275 https://www.ci.oswego.or.us

‐

" and select your neighborhood Channel. In this

‐

" and select your neighborhood's Tone. In this