Motorola CP 140 Informations sur les services - Page 9

Parcourez en ligne ou téléchargez le pdf Informations sur les services pour {nom_de_la_catégorie} Motorola CP 140. Motorola CP 140 46 pages. Uhf2 (438-470mhz)
Également pour Motorola CP 140 : Manuel de l'utilisateur (26 pages), Manuel d'utilisation de base (16 pages), Manuel d'utilisation de base (16 pages), Manuel d'utilisation de base (18 pages), Manuel de service détaillé (28 pages), Manuel d'installation Cps/Tuner (6 pages), Informations sur les services (46 pages)

Motorola CP 140 Informations sur les services
1.0

Introduction

This Chapter provides a detailed theory of operation for the UHF circuits in the radio. Schematic
diagrams and board layout diagrams are included in Chapter 4 in this Section of the manual.
2.0
UHF (465-495MHz) Receiver
The UHF receiver covers the range of 465-495 MHz and provides switchable IF bandwidth for use
with 20/25/30 kHz or 12.5 kHz channel spacing systems. The receiver is divided into two major
blocks, as shown in Figure 2-1.
Front End
Back End
RX from
Antenna Switch
Preselector
RF
Filter
Amp
First LO
from Synthesizer
Recovered Audio
RSSI
Figure 2-1 UHF Receiver Block Diagram

THEORY OF OPERATION

Interstage
Crystal
Filter
1st Mixer
Inj Filter
6G
Ceramic
Resonator
Demodulator
12.5kHzFilter
Chapter 2
IF
Amp
Filter
BW_SEL
6E
Cer Fltr
Switching
4E