Motorola GP140 Series Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Motorola GP140 Series. Motorola GP140 Series 20 pages. Professional radio, power distribution and controller
Également pour Motorola GP140 Series : Informations sur les services (32 pages), Informations sur les services (30 pages), Manuel d'entretien de base (46 pages), Informations sur les services (30 pages)
Imprimer la page
Deleting a Nuisance Channel
If a channel continually generates unwanted calls/
noise, you can temporarily remove it from the scan
list by performing a Nuisance Channel Delete
operation.
1.
While the radio is on the Nuisance Channel,
press and hold the Scan key until you hear a
tone.
2.
Release the Scan key.
NOTE:
You cannot perform a Nuisance Channel Delete
on a priority channel or if there is only one remaining
channel in the scan list.
Adding a Deleted Nuisance Channel back to
the Scan List
1.
Press the Scan key to stop the scan
operation.
2.
Press the Scan key again to re-start the scan
operation.
English
10
Scan Channel Discovery Alert
Sometimes you need to know which channel the
radio has switched to during a scan operation. The
Scan Channel Discovery Alert gives you this
information.
After you have stopped a scan operation, this
feature gives you audio feedback when you select
the last channel that was switched to by the scan
operation. To do this:
1.
Stop the scan operation.
2.
Turn the Channel Selector to change the
channels.
3.
When you reach the last channel the scan
operation switched to, the radio sounds an
alert tone.
Scan List Member Priority
A channel in your scan list may be prioritized (check
with your dealer for details). In such a case, the
radio will check that prioritized channel more
frequently than the other non-prioritized channels.