Motorola GTX Manuel d'entretien - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Motorola GTX. Motorola GTX 30 pages. 900mhz two way mobile radio
Également pour Motorola GTX : Manuel de l'utilisateur (49 pages), Manuel de l'utilisateur (36 pages), Manuel d'installation (19 pages), Manuel de l'utilisateur (25 pages)
Imprimer la page
Foreword
Service Tools
Service Tools
The following table lists the tools recommended for working on this family of radios; these tools are also available
from Motorola. Note that the R-1319A workstation requires the use of a specific "heat focus head" for each of the
components on which this item is used. Each of these heat focus heads must be ordered separately. The individual
heat focus heads (and the components on which they are used) are listed at the top of the next page.
MOTOROLA NO.
6680387A59
6680387A64
6680387A65
0180381B45 110 Vac or
0180300E06 220 Vac
8180369E97
1105139W02
0180386A81
0180386A78
0180386A82
6684253C72
6680384A98
1010041A86
1080370B43
R-1319A
xii
DESCRIPTION
Extractor, 2-contact
Heat controller with safety stand, or
Safety stand only
MBT250 Surface-mount/ thru-hole repair
station
Flux holder/applicator arrays for repair.
30cc plastic syringe and flux paste
Miniature digital readout soldering station
(incl. 1/64" micropoint tip)
Illuminated magnifying glass with lens at-
tachment
Anti-static grounding kit
Straight prober
Brush
Solder (RMA type), 63/37, 0.020" diameter
1 lb. spool
RMA liquid flux
Shields and surface-mounted component -
IC removal/rework station (order all heat
focus heads separately)
68P02948C90-O
GTX/GTX LTR/LTS 2000 Portable Radios Service Manual
APPLICATION
Removal of discrete surface-mounted devices.
Temperature-controlled, self-contained solder-
ing/desoldering repair station for installation
and removal of surface-mounted devices.
Allows for the proper amount of flux to be
applied to pad grid.
For use with flux holder/applicator
8180369E97.
Used during all radio assembly and disassem-
bly procedures.
Removal of surface-mounted integrated cir-
cuits.
February 1997