Motorola PRO Series Manuel d'entretien de base - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien de base pour {nom_de_la_catégorie} Motorola PRO Series. Motorola PRO Series 30 pages. Pro series
Également pour Motorola PRO Series : Manuel de démarrage (2 pages), Manuel de démarrage (2 pages)
![Motorola PRO Series Manuel d'entretien de base](/uploads/products/server2/6116116/6116116.png)
Chapter 3
Maintenance
3.1
Introduction
This chapter provides details about the following:
Preventive maintenance (inspection and cleaning)
Safe handling of CMOS and LDMOS devices
Disassembly and reassembly of the radio
Installation of Optional Retrofit Kit
Installation of Option Boards
3.2
Preventive Maintenance
The radios do not require a scheduled preventive maintenance program; however, periodic visual
inspection and cleaning is recommended.
3.2.1 Inspection
Check that the external surfaces of the radio are clean, and that all external controls and switches are
functional. It is not recommended to inspect the interior electronic circuitry.
3.2.2 Cleaning Procedures
The following procedures describe the recommended cleaning agents and the methods to be used
when cleaning the external and internal surfaces of the radio. External surfaces include the front
cover, housing assembly, and battery case. These surfaces should be cleaned whenever a periodic
visual inspection reveals the presence of smudges, grease, and/or grime.
NOTE Internal surfaces should be cleaned only when the radio is disassembled for service
or repair.
The only recommended agent for cleaning the external radio surfaces is a 0.5% solution of a mild
dishwashing detergent in water. The only factory recommended liquid for cleaning the printed circuit
boards and their components is isopropyl alcohol (70% by volume).
CAUTION: Certain chemicals and their vapors can have harmful effects on certain plastics.
!
Avoid using aerosol sprays, tuner cleaners, and other chemicals.
Cleaning External Plastic Surface
Apply the 0.5% detergent-water solution sparingly with a stiff, non-metallic, short-bristled brush to
work all loose dirt away from the radio. Use a soft, absorbent, lintless cloth or tissue to remove the
solution and dry the radio. Make sure that no water remains entrapped near the connectors, cracks, or
crevices
Cleaning Internal Circuit Boards and Components
Isopropyl alcohol (70%) may be applied with a stiff, non-metallic, short-bristled brush to dislodge
embedded or caked materials located in hard-to-reach areas. The brush stroke should direct the
dislodged material out and away from the inside of the radio. Make sure that controls or tunable
components are not soaked with alcohol. Do not use high-pressure air to hasten the drying process
3-1