AEMC instruments L452 Manuel de démarrage rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AEMC instruments L452. AEMC instruments L452 17 pages.

Precautions Before Use

These warnings are provided to ensure the safety of personnel. Please read and

comply with these precautions.

This instrument complies with safety standard EN 61010-1 (Ed 3) and IEC

61010.2-030 (Ed 1) for voltages and categories of installation at an altitude below

2000m (6562ft) and indoors with a degree of pollution at most equal to 2. The

instrument operates at 30V maximum to ground (

■ Do not use this instrument in an explosive atmosphere or in the presence of

flammable gases.

■ Observe the maximum voltages and intensities assigned between terminals

and ground/earth.

■ Do not use the instrument if it appears damaged, incomplete, or improperly

closed.

■ Before each use, check the condition of the insulation of cables, case, and

accessories. Anything that appears damaged (even partially) must be reported

for repair or scrapping.

■ Use only leads and accessories that meet instrument specifications.

■ Observe the environmental specifications for the use of this instrument as

specified in §7 of the User Manual.

■ Do not modify the instrument. Use only original replacement parts. Repairs or

adjustments must be performed by authorized personnel.

■ Replace the batteries when they can no longer hold a charge. Disconnect all

cables from the instrument before opening the access door to the batteries as

explained in §8.1.3 of the User Manual.

■ Use protective equipment as required by the environment where you are

operating this instrument.

■ Keep fingers behind the guard when handling probes, probe tips, current

sensors, signal conditioners, and alligator clips.