AEMC instruments L452 Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AEMC instruments L452. AEMC instruments L452 17 pages.

5. To change the editable part of the name, press

change the selected character. Then, press ► to highlight the next character and

use the ▲ and ▼ buttons to make your change. You can also press ◄ to navigate

back to a previous character. When finished, press

With Bluetooth enabled and configured on the instrument, you can connect to the

computer. These steps assume the instrument has not been previously connected via

Bluetooth:

1. Open the Bluetooth Devices dialog on your computer to pair the Model L452 with

your computer. Different operating systems have different steps for opening this

dialog, so consult your computer's documentation for instructions.

2. Once the dialog is displayed, click Add a Device. A dialog box will appear and list

the locally available Bluetooth devices.

3. Find the instrument, which will appear listed by its Bluetooth name as displayed in

the Model L452's Bluetooth Name screen. If the name does not appear, check the

Bluetooth Enabled/Visibility screen on the Model L452 to ensure the Visibility field

is set to Visible. Also, ensure the instrument is turned ON. If the name is visible,

click it.

4. Enter the pairing code (0000) and click Next. A screen will appear and inform you

that the instrument has been successfully connected with the computer. Click

Close to exit the screen.

5. Open the Data Logger Control Panel. In the menu bar at the top of the screen,

select Help. In the drop-down menu that appears, click the option Help Topics to

open the Data Logger Control Panel Help system.

6. Use the Contents window in the Help system to locate and open the topic

"Connecting to an Instrument." This topic will explain how to connect the Model

L452 to the computer.

When the instrument is connected, its name will appear under Data Logger Network in

the Control Panel's navigation frame.

Configuring the Instrument via the Control Panel

1. With the instrument connected, click its name under Data Logger Network in the

Control Panel.

2. Select Instrument in the menu bar and click Configure.

3. In the General tab of the Configure Instrument dialog box, set the instrument's

clock, date/time format, and user interface language. Press the Help button at the

bottom of the dialog box for instructions.

Setup via the Model L452 User Interface

In addition to enabling/disabling and configuring Bluetooth, the following configuration

parameters can be set through the instrument's front panel interface:

■ Language.

■ Date and time.

The "home" screen for the interface is the Channel 1 & 2 Measurement screen. You

can return to this screen at any time by giving the

seconds) press.

twice and use ▲ and ▼ to

to save your changes.

button a short (less than 2