Epson 2000P - Stylus Photo Color Inkjet Printer Manuel de configuration - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Epson 2000P - Stylus Photo Color Inkjet Printer. Epson 2000P - Stylus Photo Color Inkjet Printer 17 pages. Product support bulletin(s)
Également pour Epson 2000P - Stylus Photo Color Inkjet Printer : Remplacement des cartouches (2 pages), Bulletin d'information sur les produits (6 pages), Bulletin d'information sur les produits (1 pages), Spécifications (1 pages), Informations sur le produit (13 pages), Manuel de l'utilisateur (12 pages), Bulletin d'information sur les produits (3 pages), Bulletin d'information sur les produits (2 pages), Bulletin d'information sur les produits (4 pages), Bulletin d'information sur les produits (7 pages), Manuel de démarrage rapide (2 pages), Manuel d'instructions d'installation (8 pages)

Epson 2000P - Stylus Photo Color Inkjet Printer Manuel de configuration

Connecting the Printer

If you are connecting the printer to a PC, it is possible to use either the
parallel or USB interface. Macintosh computers must be connected via
the USB interface. Depending upon your geographic location, you may
need to acquire the appropriate cable. See "Options and Consumable
Products" in the Daily Use guide for details.
Note:
In order to connect your PC via the USB interface, your computer must be
equipped with a USB port.
Using the parallel interface for PCs
To connect the printer to a parallel port, you need a shielded, twisted-
pair parallel cable. Follow the steps below.
1. Make sure both the printer and computer are turned off.
2. Plug the cable connector securely into the printer's interface
connector. Then squeeze the wire clips together until they lock in
place on both sides. If your cable has a ground wire, connect it to the
ground connector below the interface connector.
3. Plug the other end of the cable into the computer's parallel interface.
If there is a ground wire at the computer end of the cable, connect it
to the ground connector at the back of the computer.